how do you line up top yoke after head stock bearing change

[imaginationman2003 1]

does anyone know how to make sure the top yoke and bars are on straight after a new set of headstock bearings have been fitted they were done before i brought the bike and feel slightly out of line if its a simple fix it would save going 70miles to get the delership where i brought it to do it . its a 2000 x11

[fast_eddy 712]

I used to get the wheel into a corner and wiggle the bars from side to side after slackening the pinch bolts a bit.

However, I suspect the dealers spanner monkey has overtightened the new bearings.

[Guest JamesCates]

If the dealer did the bearing replacement, I'd take it back there. Like Eddy says, sounds like bearings could be overtightened.

[Guest raeman]

As Eddy said.