About the clack clack! when start from cold.

[Guest Necro]

I have this problem since I bought the bike, I read the solution in the FAQ:

Why does the engine or clutch knock when I start from cold?

Use the x11oc starting technique!

• Turn on ignition
  
• Pull in clutch lever and hold it in!
  
• Start engine
  
• Pull out fast idle knob (LH side under frame near back of tank) until 1500rpm shows on tacho (standard idle speed 1100 rpm).
  
• Slowly release clutch lever.
  
• Alow bike to warm up... push back the fast idle knob and ride away with a grin!
  

But it does not work, the bike still making this clack noise, this may be that the clutch has been damaged???

(Sorry for my english, I hope you understand me)

[fast_eddy 707]

Also check the Balancer shaft adjuster by slackening the locknut and turning the shaft clockwise until resistance is felt then back a bit.

I hope you understand what I mean.

The adjuster is left of the oil pipe in this picture...

Verifique el ajustador de túnel de Balanceador aflojando la contratuerca y la vuelta el túnel a la derecha hasta que resistencia sea sentida entonces atrás un poco. Espero que comprenda lo que significo. El ajustador es dejado del tubo de petróleo en esta imagen.

[Guest Necro]

Thanks Fast_Eddy, I think I understand, is it like in this scheme?

tomorrow I will try the solution, I hope not mistaken screw!

I'll keep you informed.

By the way, I hope someday to get to know my x11 Scotland, is one of my dreams. I am from Asturias, northern Spain, is very similar to Scotland, the scenery and climate, not many days suitable for bike lol!

[fast_eddy 707]

Here it is....

[Guest chunky]

By loosening this off and re adjusting will it help with the clacking as you put it on start up? is it to be done when running or before?