trikey

Top yoke cover bolts.

14 posts in this topic

Has anyone found any stainless replacement bolts for the top yoke cover, mine are looking past their best an I'd like to replace them.

 

 

0

Share this post


Link to post

Thanks for the link, I think the bolts are not standard, so trying to find stainless might be difficult, I might just go for new originals.

0

Share this post


Link to post
47 minutes ago, trikey said:

Thanks for the link, I think the bolts are not standard, so trying to find stainless might be difficult, I might just go for new originals.

They are not standard, couple days ago i search for that bolts to and only option is to buy OEM. Also you get take your old ones to turner to make a new ones, but probably buying new will be cheaper. 

1

Share this post


Link to post

The Parts list will give you the size for the OEM ones so see if you can get SS bolts that size !

1

Share this post


Link to post

which bolts are you wanting please put number off  the Honda page ?

0

Share this post


Link to post
7 hours ago, blueboy said:

which bolts are you wanting please put number off  the Honda page ?

 

These fellows, they have a shoulder on them rather than a standard cap screw.

 

 

Capture.PNG

0

Share this post


Link to post

if you can find dome headed m6 x 14 s/s bolts you could put a copper ,or plastic sleeve on them the same dia ..and length as collar  or clean up or replace with new then paint

1

Share this post


Link to post

ps you can get m6 x 14 s/s  on flea bay 5 for £2.something 

1

Share this post


Link to post
On 16/08/2021 at 13:08, blueboy said:

which bolts are you wanting please put number off  the Honda page ?

 

These fellows, they have a shoulder on them rather than a standard cap screw.

 

Cheers Blueboy, will give that a go I reckon.

0

Share this post


Link to post

The seller I posted has items which you can spec with a sleeve. I bought some for my hornet side fairing bolts and some other bolts. Both bolts were the same size but had different shoulder lengths. I was able to order the right combinations from that seller.

1

Share this post


Link to post

https://www.ebay.co.uk/itm/154472771431?hash=item23f74b6f67:g:O34AAOSwczBgsuSE

Honda part number: 90106KBV000

Based on a quick check, the above part number is the correct part for the top yoke cover bolts and for the radiator cover bolts.

 

The ebay link above should work for these bolts. I'm gonna carry on looking to see if theres a cheaper option but above should work.

0

Share this post


Link to post

 

https://www.ebay.co.uk/itm/154492457675?var=454563929552&hash=item23f877d2cb:g:lowAAOSwL-Bgxrou

So, the above link is 3mm too long but should still work. 

I've just done a quick visual check of the bike and 90106KBV000 seems to be used on the rear fairings, rad guards and top yoke cover. They all have sufficient clearance for a 16mm bolt to be used instead of a 14mm bolt.

 

This link is a little less blingy and cheaper than the first link as well.

Edited by AK1011
0

Share this post


Link to post

Correction, 4 of the bolts ( 2 on the front of the rad guards and 2 on the bottom) are 90113MM5000 (4mm shoulder). (The previously mentioned part has a 6mm shoulder).

The last posted link does have 4mm shoulder bolts as well.

 

 

0

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now